Bibliographie

Cliquez sur l'initiale de l'auteur que vous recherchez

A B C D E F G H I J K L M N O P Q R S T U V W Z

AAA (1992) Substitution of Organic Solvents - The Danish Experience. Aktionsgruppen Arbejdere Akademikere (Action Group Workers and Academics), Valby (Denmark)

ACGIH (1992) Methylene Chloride. In: Documentation of the Threshold Limit Values. Sixth Edition. pp 981-987. American Conference of Governmental Industrial Hygienists, Cincinnati

AIHA (1994) Workplace Environmental Exposure Level Guides: N-Methyl-2-Pyrrolidone. American Industrial Hygiene Association Journal 55(2): 176-177

AIHA (1993) Workplace Environmental Exposure Level Guides: d-Limonene. American Industrial Hygiene Association, Fairfax, VA.

Altpeter, J.; Andersen, S.O.; Cooper, M.; Eckersley, C.; Ferguson, L.; Guth, L.; Lichtenberg, L.; McNeil Jr, J.; Pillar, W.; Sterian, I.; Szymanowski, R.; Wade, R.; Zatz, M. (1993) No-Clean Soldering to Eliminate CFC-113 and Methyl Chloroform Cleaning of Printed Circuit Board Assemblies. United States Environmental Protection Agency (EPA-430-B93-005), Washington,DC

Amdur, M.O. (1991) Air Pollutants. In: Casarett and Doull's Toxicology - The Basic Science of Poisons, pp. 854-871. M.O. Amdur; J. Doull; C.D. Klaassen, Ed. Pergamon Press, New York

Andersson, I.M.; Niemalä, R.; Rosén, G.; Säämänen, A. (1993) Control of Styrene Exposure by Horizontal Displacement Ventilation. Applied Occupational and Environmental Hygiene 8(12):1031-1037

Anderson, L. (1994) Centre de recherche industrielle du Québec, Communication personnelle avec René Garneau et Denis Bégin. Réunion le 28 septembre 1994

Andrews, L.S.; Snyder, R. (1991) Toxic Effects of Solvents and Vapors. In: Casarett and Doull's Toxicology - The Basic Science of Poisons, pp. 681-722. M.O. Amdur; J. Doull; C.D. Klaassen, Ed. Pergamon Press, New York

Anonyme (1993a) The Perfect Press: Printers' Point of View. From waterless to digital, these six printers air their views on the "perfect" press. American Printer 211(3):65-67

Anonyme (1993b) For Aluminum Window/Door Fabricator: Powder Coating is Finish of Choice. Plating and Surface Finishing 80(7):8-9

Anonyme (1993c) Putting the terpenes to work. European Surface Treatment 3 (Spring):43-44

Anonyme (1993d) The Perfect Press: Printers' Point of View. From waterless to digital, these six printers air their views on the "perfect" press. American Printer 211(3):65-67

Anonyme (1993e) Pflanzenöl, ein Reinigungsmittel für den Offset, das sich mit der Umwelt "gut" verträgt (Vegetable oil, an environment-compatible cleaning agent for offset). Man Roland Rev. (30):15

Anonyme (1992a) Hybrid PU Cuts Styrene Levels. Reinforced Plastics 36(3):12

Anonyme (1992b) Removing the Water Easily. Graphic Arts Monthly 64(4):44

Anonyme (1992c) Surface treatment and cleaning in the aircraft industry. European Surface Treatment 2(Autumn):7-8,10-12

Anonyme (1992d) An alternative to laminating with solvent-based adhesives. Euro Flexo Magazine (October):31

Anonyme (1990a) Fountain Solutions for Lithographic Printing. Research Disclosure (315):539

Anonyme (1990b) PMS and VT Vie for Markets Held by Styrene Monomer. Chemical Marketing Reporter 238(1):13-14

Anonyme (1990c) Gamma-Butyrolactone. In: Toxicological Evaluations 1. Potential Health Hazards of Existing Chemicals, pp. 133-153. BG Chemie, Ed. Springer-Verlag, Berlin

Anonyme (1989) N-Methylpyrrolidone. In: Solvents, pp. 242-244. D. Walsh, Ed. The Royal Society of Chemistry, Nottingham, UK

Anonyme (1988) Styrene in Paint Challenged; Vinyltoluene and PMS Touted. Chemical Marketing Reporter 234(25):12-13

Anonyme (1983a) Safer parts finishing cuts cost. American Machinist 127(2):82-83

Anonyme (1983b) Substitution of hazardous glycol ethers in marine paints. Health and Safety Bulletin (Australia) (34):1-3

Anonyme (1980) LSE capability with good interlaminar adhesion. Reinforced Plastics 24(3):72-73

Anonyme (1979) Cost Efficiency is Bonus in RP Resins Developed to Cut Styrene Emissions. Modern Plastics 56(12):38-41

Ansell, J.M. (1982) The use of solvent substitution as a method for improving health and safety. In: Safe use of solvents, pp. 269-281. A.J. Collings; S.G. Luxon, Ed. Academic Press, London, UK

Archer, W.L. (1992) Using the Hansen solubility parameter theory in reformulating solvent-based coatings. American Paint & Coatings Journal 76(39):38-46

Arndt, S.C. (1991) An Alternative to Methylene Chloride for Removal of Lead-based Paint. In: Reducing Risk in Paint Stripping, Washington,DC, 12-13 February 1991, pp. 195-196. Economics and Technology Division; Office of Toxic Substances; United States Environmental Protection Agency, Washington,DC, 1991

Athey, C.; Hester, C.; McLaughlin, M.; Neulicht, R.M.; Turner, M.B. (1988) Reduction of Volatile Organic Compound Emissions from Automotive Refinishing. Control Technology Center; U.S. Environmental Protection Agency (EPA-450/3-88-009), Research Triangle Park, N.C.

Aubert, J.S. (1993) "Green" protective coatings. Polymers Paint Colour Journal 183(4324):105

Axelson, O.; Hogstedt, C. (1994) The Health Effects of Solvents. In: Occupational Medicine, pp. 764-778. C. Zenz; O.B. Dickerson; E.P. Horvath, Ed. Mosby-Year Book, St-Louis