Bibliographie

Cliquez sur l'initiale de l'auteur que vous recherchez

A B C D E F G H I J K L M N O P Q R S T U V W Z

Hacker, D.M.; Cassaday, V.; Flack, J.R. (1993) Report on the Canadian Coatings Industry. Ortech International, Mississauga

Hague, J. (1991) European solution to the challenge of industrial degreasing. European Surface Treatment 1(1):26-27

Hague, J.; Heckendorn, R. (1989) An Environmental Cloud with a Silver Lining. Finishing 13(12):21-23

Hart, J. (1990) The radiation curing of polymers. Paint & Ink International 3(4):8,10-11

Hartsuch, P.J. (1979) Chemistry for the Graphic Arts. Graphic Arts Technical Foundation, Pittsburgh

Hendriksen, K.; Parking, J.; Haagensen, S. (1990) Soya-bean oil as a cleaning agent for offset printing presses. Advances in printing science and technology 20:111-117

Hestar, C.I.; Nicholson, R.L. (1989) Powder Coatings Technology Update. United States Environmental Protection Agency; Control Technology Center (EPA-450/3-89-33), Research Triangle Park,N.C.

Hirsch, A. (1991) Ultra High-pressure Water for Paint Removal in the Original Equipment Manufacturing Sector. In: Reducing Risk in Paint Stripping, Washington,DC, 12-13 February 1991, pp. 59-61. Economics and Technology Division; Office of Toxic Substances; United States Environmental Protection Agency, Washington,DC, 1991

Hoffman, W.E.; Miles, D.E. (1992) UV Light-Cured PSAs Provide Application Alternatives. Adhesives Age 35(4):20,22-24

Holman, R. (1992) Solutions Without Solvents and the Radcure Alternative. In: Second Asia-Pacific Conference on Advances in Coatings, Inks and Adhesives Technology, Singapore, pp. 1-15. Paint Research Association, Teddington, U.K., 1992

Howard, P.H. (1993) Handbook of Environmental Fate and Exposure Data for Organic Chemicals. Volume IV: Solvents 2. Lewis Publishers, Chelsea,Mi.

Howard, P.H. (1990) Handbook of Environmental Fate and Exposure Data for Organic Chemicals. Volume II: Solvents. Lewis Publishers, Chelsea, MI.

Hoy, K.; Pelgrims, J. (1991) UnicarbTM System for Spray Coatings: A Contribution to Pollution Prevention. In: XIXe AFTPV Congress: Eurocoat 91, Nice (France), pp. 122-130. Association française des techniciens de peinture et vernis, 1991

HSE (1994) 7 Steps to Successful Substitution of Hazardous Substances. United Kingdom Health and Safety Executive, HSE Books, Sudbury, Suffolk, UK

Huang, E.W. (1994) Research, Development, and Demonstration of Zero-VOC Wood Coatings. In: First North American Conference & Exhibition on Emerging Clean Air Technologies and Business Opportunities, Toronto, 26-30 September 1994, pp. 1-9.

Huisingh, D. (1989) Cleaner technologies through process modifications, material substitutions and ecologically based ethical values. UNEP Industry and Environment 12(1):4-8

Huisingh, D.; Martin, L.; Hilger, H.; Seldman, N. (1986) Proven Profits from Pollution Prevention: Case Studies in Resource Conservation and Waste Reduction. Institute for Local Self-Reliance, Washignton,D.C.

Hunt, B. (1993) Plates and platemaking: creating the right image. Labels & Labelling 15(1):22,24