Bibliographie

Cliquez sur l'initiale de l'auteur que vous recherchez

A B C D E F G H I J K L M N O P Q R S T U V W Z

Laden, F.; Gray, G.M. (1993) Toxics Use Reduction: Pro and Con. Risk - Issues in Health & Safety 4:213-234

Laforest, J.C.; Mahieu, J.C. (1981) Mise en oeuvre des polyesters stratifiés. Cahiers de notes documentaires (102):73-77

Larson, N. (1990) Low Toxicity Paint Stripping of Aluminum and Composite Substrates. In: The First International Workshop on Solvent Substitution, Phoenix, AZ, 4-7 December 1990, pp. 50-75. Noyes Data Corporation, Park Ridge,NJ, 1993

Lea, C. (1993) Metal and precision cleaning without ozone-depleting solvents. Finishing 17(3):20-24

Lea, C. (1991) The Replacement of CFC-113 in the Electronics Assembly Sector (Document No.16). In: United Nations Environment Programme Workshop on the Implementation of the Montreal Protocol for the Protection of the Ozone Layer, Heliopolis/Cairo-Egypt, 9-12 December 1991, United Nations Environment Programme, Industry and Environment Programme Activity Centre, Paris, 1991

Leleu, M. (1980) Peintures à solvants: Composition et risques toxicologiques. Cahiers de notes documentaires 98:53-62

Lenz, R.; Oestreich, J. (1991) Envirostrip Starch Blast Media - A Safe, Economical Alternative to Methylene Chloride Strippers. In: Reducing Risk in Paint Stripping, Washington,DC, 12-13 February 1991, pp. 93-94. Economics and Technology Division; Office of Toxic Substances; United States Environmental Protection Agency, Washington,DC, 1991

Libner, L. (1994) Newsletter-Subsprint project-Second Issue (April). Kooperationsstelle, Hamburg

Libner, L.; Thormählen, H.; Westphal, U.; Hendriksen, K. (1993) Newsletter-Subsprint project-First Issue (July). Kooperationsstelle, Hamburg

Liebe, K. (1986) Contribution du photodurcissement à la transformation peu polluante des résines UP. Composites 26(3):91-96

Long, D.; Barush, J. (1993) New formulations and films widen water-based adhesive appeal. Canadian Packaging 46(5):37-38

Looby, G.P.; Kirsch, F.W. (1992a) Waste Minimization Assessement for a Manufacturer of Components for Automobile Air Conditioners. United States Environmental Protection Agency; Risk Reduction Engineering Laboratory (EPA/600/S-92/009), Cincinnati,OH

Looby, G.P.; Kirsch, F.W. (1992b) Waste Minimization Assessment for a Manufacturer of Sheet Metal Cabinets and Precision Metal Parts. United States Environmental Protection Agency; Risk Reduction Engineering Laboratory (EPA/600/S-92/021), Cincinnati,OH

Looby, G.P.; Kirsch, F.W. (1992c) Waste Minimization Assessment for an Aluminum Extrusions Manufacturer. United States Environmental Protection Agency; Risk Reduction Engineering Laboratory (EPA600/S-92/018), Cincinnati,OH

Lowell, J.H. (1985) Coatings. In: Encyclopedia of Polymer Science & Engineering, Volume 3, pp. 615-675. H. Mark; N. Bikales; C. Overberger; G. Menges, Ed. John Wiley & Sons, New York